Asus Accessories - Official Quality for Your Asus Devices.
  • Choose your language
Asus Accessories>News>Essential ROG Ally X Repair Guide

Essential ROG Ally X Repair Guide

Share on
ROG Ally X Repair


Reading time: 2 minutes

ROG Ally X Repair Guide

As an owner of the ROG Ally X, you know it’s a powerful, versatile gaming device. However, like any complex hardware, it can encounter a few hiccups. From a broken joystick to battery problems, screen issues, and loud fan noises, we at Asus Accessories are here to help. In this guide, we’ll walk you through common repair steps for the ROG Ally X, focusing on ways to troubleshoot and, if necessary, replace faulty parts using genuine Asus components. Here we will give an overview, but below you'll find an in depth tutorial on how to take apart and reassemble the ROG Ally X, with our very own Asus Specialist!

1. Replacing a Broken Joystick

The joysticks on the ROG Ally X are heavily used, so they’re prone to wear and tear. Here’s how you can replace a faulty joystick. Remember, if in doubt you can always reference our tutorial video above!

Symptoms of a Broken Joystick:

  • Inaccurate or “drifting” movements in-game
  • Unresponsive or stuck joystick

Tools Needed:

Steps:

  1. Turn Off the Device: Before beginning, make sure the ROG Ally X is completely powered off.
  2. Remove the Back Cover: Use a small precision screwdriver to remove the screws on the back of the device.
  3. Detach the Battery Cable: Carefully disconnect the battery cable to prevent any accidental electrical discharge. If in any case you need to replace this cable, we offer most Ally X FFCs on our site as well!
  4. Locate the Joystick Module: Once the device is open, locate the joystick on the internal board.
  5. Replace the Joystick: Use a screwdriver to remove the screws securing the joystick. Swap it with your new Asus joystick, ensuring it’s securely fastened.
  6. Reassemble the Device: Reconnect the battery cable, replace the back cover, and secure the screws.

After reassembly, test the joystick’s functionality. With a new joystick, you should notice smoother, more responsive controls.

ROG Ally X Joystick

2. Resolving a Faulty Screen

Screen issues can range from flickering and dead pixels to complete display failure. If these problems persist, a screen replacement may be necessary.

Common Screen Problems:

  • Flickering or glitchy display
  • Unresponsive touchscreen
  • Cracks or physical damage

Tools Needed:

  • Precision screwdriver
  • Suction cup or plastic opening tool
  • Replacement screen from Asus Accessories

Steps:

  1. Turn Off the Device and Disconnect Power: Make sure your device is powered off and unplugged.
  2. Remove the Back Cover and Battery Connector: Use your precision screwdriver to open the back cover and disconnect the battery cable.
  3. Detach the Existing Screen: Use a suction cup or plastic tool to gently separate the screen from the device’s body. Be cautious around the edges to avoid damaging internal components.
  4. Disconnect the Display Cable: Once the screen is loose, locate the display cable and gently disconnect it from the motherboard.
  5. Install the New Screen: Connect your replacement screen to the display cable, ensuring the connection is secure.
  6. Reassemble: Place the screen in position, close the device, and secure all screws.

Turn on your ROG Ally X to ensure the screen is functioning. With a new Asus replacement screen, you’ll get the same high-quality visuals. We also recommend this article from Asus to optimize your graphics settings!

ROG Ally X Fan

3. Fixing a Loud Fan

A loud fan can be distracting and indicate a potential hardware issue, such as a fan blockage or overheating.

Causes of Loud Fan Noise:

  • Dust and debris buildup
  • Malfunctioning fan
  • Software issues causing the fan to overwork

Steps to Fix:

  1. Clean the Fan: Begin by turning off and opening the device to access the fan. Use compressed air to gently blow away any dust.
  2. Check for Obstructions: Make sure there are no small objects or dust clogs around the fan.
  3. Update the Firmware: Sometimes, software updates from Asus can help recalibrate the fan. Visit the official Asus website for the latest firmware updates for the Ally X.
  4. Replace the Fan (if necessary): If cleaning and updating do not resolve the noise, a fan replacement might be required.

To replace the fan:

  1. Remove the Back Cover and Battery Connector: Power off, unscrew the back cover, and disconnect the battery cable.
  2. Locate and Replace the Fan: Remove any screws securing the fan, disconnect it from the motherboard, and install the replacement fan from Asus Accessories.
  3. Reassemble: Close the device, reconnect the battery cable, and secure all screws.

Your Ally X should now run more quietly, allowing for an immersive gaming experience.

ROG Ally X

4. Solving Battery Problems

Battery issues can impact gameplay time and overall performance. If your device is experiencing fast drainage or won’t charge, you may need to replace the battery. You can also check out our article on how to optimize performance on your Ally X.

Signs of Battery Issues:

  • Battery drains quickly
  • Device doesn’t hold a charge
  • Overheating while charging

Steps to Replace the Battery:

  1. Turn Off the Device and Remove the Back Cover: Power off and unscrew the back cover.
  2. Locate and Remove the Battery: Gently disconnect the battery cable from the motherboard.
  3. Install the New Battery: Insert the replacement battery from Asus Accessories, securing it in the same position.
  4. Reassemble: Replace the back cover and secure it with screws.

Testing your new battery will show improved battery life and charging consistency, restoring your Ally X’s full potential.

General Maintenance Tips for Optimal Performance

To keep your ROG Ally X running smoothly, adopt these preventative maintenance practices:

  • Regularly Clean Your Device: Dust buildup can harm internal components, especially around vents and the fan. Use compressed air to keep these areas clean.
  • Update Software and Firmware: Asus frequently releases updates for the ROG Ally X to optimize performance and fix bugs. Check the Asus website for the latest updates.
  • Use a Protective Case: A sturdy case can protect the screen, joysticks, and overall body from accidental drops or impacts.
  • Avoid Overcharging: Prolonged charging can affect battery life. Disconnect the charger once the battery reaches 100%.
ROG ally X console

Where to Get Genuine Asus Replacement Parts

At Asus Accessories, we’re committed to providing high-quality, genuine replacement parts for the ROG Ally X. From joysticks and screens to even small parts like screws or FFCs, our parts are sourced directly from Asus to give you peace of mind. We also offer detailed product descriptions and customer support to guide you through the selection process.

Whether you’re looking to repair a specific part or simply want to upgrade your device, Asus Accessories has all the replacement parts you need to keep your ROG Ally X, laptop or Asus smartphone in peak condition.

For more in-depth guidance or to purchase replacement parts, Asus Accessories is your trusted source with over 20 years of experience and 200,000+ products in stock!

ROG Ally X parts